FLUKE BENCHTOP MULTIMETERS
FLUKE BENCHTOP MULTIMETERS
FLUKE - Extended Fine Point Tip Adapter Set
Model # 8845A-EFPT
- Designed to IEC 1010 standard
- Adapter allows access to hard-to-reach test points
- Tips are insulated to the point to prevent shorting of adjacent components
FLUKE - 6.5 Digit Precision Multimeter (incl. software + cable) Kit
Model # 8846A-SU 240V
- 6.5 digit resolution
- Basic V DC accuracy of up to 0.0024%
- Dual display
- 6.5 digit resolution
- Basic V DC accuracy of up to 0.0024%
- Dual display
FLUKE - 6.5 Digit Precision Mulitmeter
Model # 8846A 240V
- 6.5 digit resolution
- Basic V DC accuracy of up to 0.0024%
- Dual display
FLUKE - 6.5 Digit Precision Multimeter (incl. software + cable) Kit
Model # 8845A-SU 240V
FLUKE - 6.5 Digit Precision Multimeter
Model # 8845A 240V
- 6.5 digit resolution
- Basic V DC accuracy of up to 0.0024%
- 100 µA to 10 A current range; with up to 100 pA resolution
- Broad range of functions; measuring volts; ohms and amps with a basic V DC accuracy of 0.015%
- Measure small currents with a resolution of up to 100 nA.
- Dedicated dc leakage current measurement
FLUKE - 5.5 Digit Multimeter; 2X4W Test Lead Kit
Model # 8808A-TL 240V
FLUKE - Hard Case (8845A/8846A)
Model # 884X-CASE
- Tough molded plastic case with die-cut foam to hold and protect the 8845A or 8846A meter
- Accessories and manual compartments
- One-year warranty
FLUKE - Test Probe IC Tip Set
Model # 8845A-TPIT
- Pin tip jack at the adapter end is recessed for added insulation protection
- Adapter allows easy access to leads of through-hole IC’s
- Insulation at the tip fits between leads to prevent accidental shorting
FLUKE - USB Memory 1 GB
Model # 884X-1G
- Plugs into USB device host port on the 8846A front panel
- Fully compliant with Universal Serial Bus Specification v2.0
- Dual LED indicates power and busy status
FLUKE - 100 OHM RTD Temperature Probe
Model # 884X-RTD
- Resistance Nominal 100 Ω
- Temperature coefficient 0.00385 Ω/Ω °C nominal
- Drift rate + 0.13 °C at 0 °C after 1000 hours at 300 °C
FLUKE - 4-wire short
Model # 884X-SHORT
- 4-terminal shorting bar
- 4 mm banana terminals sized and oriented to short DMM input source and sense terminals
- Used to null out front end offsets or as required by the calibration procedure
FLUKE - USB to RS232 Cable Adapter
Model # 884X-USB
- USB-to-serial-RS-232 interface adapter cable
- Converts from standard DB 9-pin serial to USB 2.0
- Requires an available PC communications port
FLUKE - FlukeView Forms Software + Cable (8845A/8846A)
Model # FVF-SC4
- Fluke 287 and 289 (Model FVF-SC2)
- Fluke 180 Series Digital Multimeters (Model FVF-SC2)
- Fluke 1653 Installation Testers (Model FVF-SC2)
FLUKE - Fluke View Forms Basic (8845A/8846A)
Model # FVF-SC5
- Fluke FVF-SC5 Flukeview Forms Basic Software
- For 8845/8846 Series Meters
FLUKE - FlukeView Forms Upgrade
Model # FVF-UG
- FlukeView Forms supports the following meters:
- Fluke 287 and 289 (Model FVF-SC2)
- Fluke 180 Series Digital Multimeters (Model FVF-SC2)
- Fluke 1653 Installation Testers (Model FVF-SC2)
FLUKE - IEEE-488 Shielded Interface Cable; 1 m
Model # Y8021
FLUKE - IEEE-488 Shielded Interface Cable; 2 m
Model # Y8022
- Cable length: 2m
- For use with Models for 8845A and 8846A
FLUKE - Rack mount kit dual (8845A/8846A)
Model # Y8846D
- 2 Small filler plate
- 1 Dual center mount
- 1 Rack mount tray
FLUKE - Rack mount kit single (8845A/8846A)
Model # Y8846S
- 1 small filler plate
- 2 large filler plates
- 1 rack mount tray
FLUKE - 5.5 Digit Multimeter (software & cable) Kit
Model # 8808A-SU 240V
- Broad range of functions; measuring volts; ohms and amps with a basic V DC accuracy of 0.015%
- Measure small currents with a resolution of up to 100 nA.
- Six dedicated instrument setup keys to instantly select saved test configurations. Ideal for making routine measurements.
FLUKE - 5.5 Digit Multimeter
Model # 8808A 240V
- Broad range of functions; measuring volts; ohms and amps with a basic V DC accuracy of 0.015%
- Measure small currents with a resolution of up to 100 nA.
- Basic V DC accuracy of 0.015%